3.21.2012

How to Fix Red Ring of Death in Only a Few A few minutes

By Sam McDonald


The most prevalent problem that has affected the Xbox 360 console since its debut is the Red ring of death. There are practically a limitless number of website throughout the about this issue. In order to figure out how to fix red ring of death errors, it is important know the cause.

The main reason for the red ring of death is bad hardware design. The Xbox 360 is basically computer that has been redesigned for gaming and the components have been crammed into a casing with hardly any ventilation. We know for a fact that high performance components, specifically the CPU and GPU can generate a great deal of heat and without the proper heat dissipation, the unit will overheat.

Since the Xbox 360's CPU and GPU generate a lot of heat, this could lead to permanent damage and make the console irreparable. In fact, prolonged overheating can cause the solder on the motherboard to brittle and develop cracks. The red ring of death is a hardware issue that can be easily fixed. Even if you have no experience repairing electronics, you will be able to know how to fix red ring of death in less than an hour.

The red ring of death is three flashing red lights. This light code means there is general hardware failure or error. If you get an error like this, the first troubleshooting step is to check your power brick or power supply. Make sure that status light on power supply is green. If it is yellow or red, this means you have a faulty power supply and there is no need to open up the Xbox 360 console.

If the power supply looks fine, unplug power cable and try it on another wall outlet. If it does not work, check if all cables are securely in place and make sure the power supply is properly ventilated. If it changed to two red rings, this means that your console is overheating. You need to give it a few minutes to cool down before trying it out again.

After letting the console cool and you are still getting the red ring of death, the next step is disassemble the case and check the internal components. Dismantling the unit will void the warranty. If it is still within the warranty period and you are willing to wait, it is highly advisable to send the unit back for repairs.

Removing Xbox 360 case is incredibly easy to do. The locks can be released using any tool with a pointy tip and loosen the bezel. After that, slide the latches holding the DVD drive. Once is removed, you can loosen the screws of the base and remove the motherboard by unscrewing the back plate off.

Once the motherboard has been removed, it is time to screw off the two clamps for the heat sinks. Then, wipe off the thermal paste and apply a new one. Thermal compounds used by computers are highly recommended and you can get one from any PC store. Once you have applied the new thermal paste, just screw everything back on and that is how to fix red ring of death.

You can easily fix your Xbox 360 by making use of videos and courses available online. This easy repair can be accomplished in mere minutes. Knowing how to fix red ring of death problem makes sure that your Xbox 360 is working perfectly every time.




About the Author:



No comments:

Post a Comment